Tel: +31-165713025 Fax: +31-165713027
©2011 Design by TRO
Multisens offers Analysers and measurement sensors for process control or laboratory use. Application are many times found in the chemical or Petrochemical industry, food industry such as beverage or dairy factories, Pharmaceutical or Bio-Pharmaceutical industry, metal industry, drinking water, wastewater, groundwater industries.
Quick Select MENU
Site Search
Welcome to our new site.
Click in the left navigation menu for direct access or search our site on key words.
Click in the left navigation menu for direct access or search our site on key words.
The Model 3001 Levelogger Junior is a water level datalogger from Solinst that provides a low cost solution for groundwater level monitoring and surface water monitoring. It features a water level datalogger with a 5 year battery life, pressure sensor and temperature sensor, in a small, maintenance free, stainless steel housing.
The Levelogger Junior water level datalogger has a non volatile memory, with storage capacity for up to 32,000 sets of water level and temperature data points. Readings are linear and can be taken at user defined intervals between 0.5 seconds to 99 hours. The device has an accuracy of 0.1% FS, with a lifetime factory calibration...
More info on these products
The Levelogger Junior water level datalogger has a non volatile memory, with storage capacity for up to 32,000 sets of water level and temperature data points. Readings are linear and can be taken at user defined intervals between 0.5 seconds to 99 hours. The device has an accuracy of 0.1% FS, with a lifetime factory calibration...
More info on these products
Waterlevel Loggers
Waterlevel dip meters
The Model 101 Water Level Meter provides accurate water level measurement in boreholes, standpipes and wells. It is the most accurate and reliable Water Level Indicator in the Solinst Range. This water level meter is very easy to operate and read to each millimetre or 1/100ft.
Choices of probe designs are available on these water level meters. Each probe is attached permanently to marked polyethylene tape, and fitted on a well balanced reel. The P6 pressure probe is available which like the P2 probe, has a simple design which is easy to clean and hangs straight in wells. A 9 volt battery housed in an easy access battery drawer powers the meter.
More info on these products
Choices of probe designs are available on these water level meters. Each probe is attached permanently to marked polyethylene tape, and fitted on a well balanced reel. The P6 pressure probe is available which like the P2 probe, has a simple design which is easy to clean and hangs straight in wells. A 9 volt battery housed in an easy access battery drawer powers the meter.
More info on these products
The Solinst Double Valve Pump (DVP) is a pneumatic-drive pump that consistently provides high-quality samples. Field tested in thousands of different applications, the DVP is extremely reliable, never requiring bladder replacement. It generates pumping rates higher than the Solinst Integra Bladder, is available in a variety of sizes and materials.
Suitable for both low and regular variable flow rates, the DVP makes sampling easy. The stainless-steel pumps are capable of operating at depths up to 500 ft (150 m), and the PVC models can operate at depths up to 100 ft (30 m).
More info on these products
Suitable for both low and regular variable flow rates, the DVP makes sampling easy. The stainless-steel pumps are capable of operating at depths up to 500 ft (150 m), and the PVC models can operate at depths up to 100 ft (30 m).
More info on these products
Groundwater pumps
Piezometers can be pushed into suitable sediments, or installed with a drill rig for accurate vertical profiling. Drive-Point Piezometers are ideal for initial site investigations and geotechnical studies, and help determine the optimum placement of permanent piezometers or remediation equipment.
The Model 601 Standpipe Piezometer is designed to provide a filtered inlet point when it is placed within a drilled hole. Its pointed PVC tip makes it ideal for pushing into very loose sands at the base of a borehole, a stream or into loose tailings pond sediments.
More info on these products
The Model 601 Standpipe Piezometer is designed to provide a filtered inlet point when it is placed within a drilled hole. Its pointed PVC tip makes it ideal for pushing into very loose sands at the base of a borehole, a stream or into loose tailings pond sediments.
More info on these products
Piezometers
Water digital handmeters
Developed to meet all field and laboratory requierements, the Digital ODEON instruments combine the versatility of an easy-to-use, easy-to-read handheld unit.
Rugged, reliable and IP-67 waterproof, the ODEON measures dissolved oxygen with the new OPTOD optical probe, pH,ORP, conductivity, temperature, and turbidity.
Thanks to PONSEL plug and play digital probes, autodiagnostic and calibration data inside, you just have a total confidence in your readings. just measure !
Read more on Odeon line
Rugged, reliable and IP-67 waterproof, the ODEON measures dissolved oxygen with the new OPTOD optical probe, pH,ORP, conductivity, temperature, and turbidity.
Thanks to PONSEL plug and play digital probes, autodiagnostic and calibration data inside, you just have a total confidence in your readings. just measure !
Read more on Odeon line
Digital physicochemical sensors
PONSEL has developed an innovative range of digital physicochemical sensors to measure water parameters. It integrates a transmitter that collects, analyses and transmits data to any display units, data loggers or controllers fitted with Modbus RS-485 or SDI-12 inputs.
Our digital sensors are compact, robust and waterproof ( IP68 ) in order to be adaptable to any fields or applications, either handheld or fixed units. Furthermore, their conception allows a very low-power consumption and are disruption-resistant.
Read more on Rs485 network sensors
Our digital sensors are compact, robust and waterproof ( IP68 ) in order to be adaptable to any fields or applications, either handheld or fixed units. Furthermore, their conception allows a very low-power consumption and are disruption-resistant.
Read more on Rs485 network sensors
Multiparameter sensors in one shaft
This range of 3 probes very low consumption allows to measure up to 6 parameters simultaneously (pH, Redox, Conductivity, Temperature, Dissolved Oxygen, Level) to achieve the most accurate water quality analyses in all field conditions : wastewater, natural water, seawater...
Read ore on these sensors
Read ore on these sensors
TOC; COD; BOD; NO3; NO2 insitu spectral probe
This range of 3 probes very low consumption allows to measure up to 6 parameters simultaneously (pH, Redox, Conductivity, Temperature, Dissolved Oxygen, Level) to achieve the most accurate water quality analyses in all field conditions : wastewater, natural water, seawater...
Read ore on these sensors
Read ore on these sensors
Hydro Carbons Oil in water Fluori probes
enviroFlu-HC - UV-fluorometer for PAH (polycyclic aromatic hydrocarbons) detection in water
enviroFlu-HC is a new generation of high sensitive submersible sensors for oil-in-water measurement. The used UV fluorescence principle for detection is much more sensitive than any other existing detection principle, like infrared scattering, etc. This allows the detection of PAH traces in water down to single ppb levles, e.g. in drinking water or condensate applications.
Read ore on these sensors
enviroFlu-HC is a new generation of high sensitive submersible sensors for oil-in-water measurement. The used UV fluorescence principle for detection is much more sensitive than any other existing detection principle, like infrared scattering, etc. This allows the detection of PAH traces in water down to single ppb levles, e.g. in drinking water or condensate applications.
Read ore on these sensors